SILK PLA 3D Printing Filament（Silk Pink）
- Model: TS-PLA Silk-Pink
VIPENGELE:
1. Recommended Extrusion/Nozzle Temperature: 180°C - 240°C
2. Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
3. Chini ya kiwango cha shrinkage na hufanya pretty vizuri hata wakati uchapishaji kubwa mifano.
Maelezo ya bidhaa
vipimo
| Material | PLA (polylactic Acid) |
| Rangi | Silk Pink |
| Uzito | 1kg (takriban 2.2 lbs) |
| kipenyo | 1.75mm (Dimensional Usahihi +/- 0.03mm) |
| Iliyopendekezwa Extrusion / Nozzle Joto | 180°C – 240°C (356°F – 464°F ) |
| Iliyopendekezwa Msingi Bamba / Print Kitanda Joto | No heated/(20 – 70)°C |
- Recommended Extrusion/Nozzle Temperature: 180°C – 240°C
- Recommended Base Plate/Print Bed Temperature: No heated/(20 – 70)°C
- Chini ya kiwango cha shrinkage na hufanya pretty vizuri hata wakati wa kuchapisha mifano kubwa.
- High Sambamba na aina ya FDM26D printerMakerbot, UP kuongeza, Mendel, Prusa, mfululizo, nk
- Mashirika Sumu: Wote wa bidhaa kupita direktivet RoHS, yaliyotolewa na asidi 100% polylactic.
- Density ni ndogo na ni nyepesi sana na zaidi ya kiuchumi wakati wa kuchapisha mifano kubwa.
- Raw nyenzo kutoka USA. mazingira ya kirafiki na utendaji mzuri.
- Filament ni wenye Mpangilio amefungwa na Kuyeyuka pia.
- Smooth na kuendelea kuchapa bila clogging au Bubble suala
- 24 x 7 Pro Wateja Support kutoa ufumbuzi wa kiufundi.
