SILK PLA 3D Bugun Filament （Siliki Pink）
- Misali: TS-PLA Silk-Pink
fasali:
1. Recommended Extrusion/Nozzle Temperature: 180°C - 240°C
2. Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
3. Low shrinkage kudi da kuma shi aikin kyawawan kyau ko da a lokacin da buga fi girma model.
samfurin Description
Musammantawa
| Kayan aiki | PLA (Polylactic Acid) |
| launi | Silk Pink |
| Nauyi | 1Sar (kamar 2.2 lbs) |
| diamita | 1.75mm (girma Kauce wa kuskure +/- 0.03mm) |
| Shawarar extrusion / bututun ƙarfe Temperatuur | 180 ° C - 240 ° C (356 ° F - 464 ° F) |
| Shawarar Base Plate / Print Bed Temperatuur | Babu mai zafi / (20 - 70) ° C |
- Recommended Extrusion/Nozzle Temperature: 180°C – 240°C
- Recommended Base Plate/Print Bed Temperature: No heated/(20 – 70)°C
- Low shrinkage kudi da kuma shi aikin kyawawan kyau ko da a lokacin da buga fi girma model.
- High Dace da wani iri-iri FDM26D printerMakerbot, UP da, Mendel, Prusa, series, da dai sauransu.
- Non mai guba: Duk kayayyakin sun shũɗe da RoHS zartarwan, sanya ta 100% polylactic acid.
- Yawa ne ƙanana da shi ne da yawa m kuma mafi tattali lokacin da buga fi girma model.
- Albarkatun kasa daga USA. yanayi-friendly da kyau yi.
- Filament ne ma'ana nannade da kuma narke da kyau.
- Bayar da kuma ci gaba da bugu ba tare da clogging ko kumfa batun
- 24 x 7 Pro Abokin ciniki Support samar da fasaha mafita.
