SILK PLA 3D Printing Filament(Silk Pink)
- ሞዴል: TS-PLA Silk-Pink
LIKAROLOANA:
1. Recommended Extrusion/Nozzle Temperature: 180°C - 240°C
2. Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
3. Low sekhahla shrinkage le ho etsa ntle hantle le ha ho hatisa kholoanyane dikai.
Tlhaloso ea Sehlahisoa
ga tlhaloso
Boitsebiso bo | Pla (Polylactic acid) |
mala | Silk Pink |
ሚዛን | 1kg (hoo e ka bang 2.2 liponto) |
bophara | 1.75mm (tshwantshe selo sa tlhakore Nepahetseng +/- 0.03mm) |
Recommended Extrusion / Nozzle Mocheso | 180°C – 240°C (356°F – 464°F ) |
Recommended Base Plate / Print Bed Mocheso | No heated/(20 – 70)°C |
- Recommended Extrusion/Nozzle Temperature: 180°C – 240°C
- Recommended Base Plate/Print Bed Temperature: No heated/(20 – 70)°C
- Tlaase sekhahla shrinkage le ho etsa ntle hantle le ha ho hatisa dikai kholoanyane.
- Phahameng Lumellana le mefuta e fapaneng ya FDM26D printerMakerbot, UP mmoho, Mendel, Prusa, series, joalo-joalo
- Bao e seng Che: All tsa lihlahisoa li fetile ho RoHS taelo, e entsoeng ka acid e 100% polylactic.
- Segokanyipalo e nyenyane 'me e le bobebe haholo le ho feta litšenyehelo ha hatisa dikai kholoanyane.
- Raw lintho tse bonahalang ho tswa ho USA. tikoloho e khahlang-ba botsoalle le tshebetso e ntle.
- Li phutholohe ke ka mokhoa o laolehileng phuthetsoe le qhibiliha hantle.
- Boreleli le e tsoelang pele ea khatiso ntle clogging kapa bubble bath taba
- 24: x 7 Pro Customer Support fana ditharollo botekgeniki.