PLA 3D Printing Filament（White）2.85 mm
- Model: TS-PLA-White-2.85mm
Material: PLA (Polylactic Acid).
Item Weight: 1KG/ 11pounds
Item Diameter: 2.85 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
|Weight||1KG (approximately 2.2 lbs)|
|Diameter||2.85mm(Dimensional Accuracy +/- 0.03mm)|
|Recommended Extrusion/Nozzle Temperature||190°C – 220°C (374°F – 428°F )|
|Recommended Base Plate/Print Bed Temperature||No heated/(20 – 70)°C|
- Low shrinkage rate and it performs pretty well even when printing larger models.
- High Compatible with a variety of FDM24D printerMakerbot, UP plus, Mendel, Prusa, series, etc.
- Non Toxic: All of products have passed the RoHS Directive, made by 100% polylactic acid.
- Density is small and it is much lighter and more economical when printing larger models.
- Raw material from USA. environment-friendly with good performance.
- Filament is Orderly wrapped and Melt well.
- Smooth and continuous printing without clogging or bubble issue
- 24 x 7 Pro Customer Support providing technical solutions.