Product News

  • Easy Tips On How To Remove Toner Cartridge From Canon Printer
    Post time: 02-21-2019

    Canon laser printers are designed for multi-platform uses, and can handle a wide range of documents from simple text to complicated graphics. The life of your laser toner cartridge varies, depending on how much printing you do, how often you do printing, and how many graphics you are producing. G...Read more »

  • 6 Steps On How To Reset Brother Toner Cartridge HL 3040CN?
    Post time: 02-19-2019

    Brother printers have a bad low toner count mechanism which prematurely tells the user that the toners are low when actually they are not. The following are some steps on how to rest Brother toner cartridge HL 3040CN. Step 1 Open the front cover of the Brother printer, this would be the cover in...Read more »

  • How Many Pages Printed Per Toner Cartridge?
    Post time: 02-14-2019

    It’s a common trick for printer vendors to sell printer machines at or below their production cost–and then make their money later on with extremely high ink or toner costs. So, you may wonder how many prints can you get out of your toner cartridge? The first thing you need to figure out is...Read more »

  • 5 Steps On How To Reset Chip On Toner Cartridge
    Post time: 01-25-2019

    Laser printers use special toner cartridges that have smart chips installed on them. These chips, also called printer or toner smart chips, are used by printers to monitor the reserves and levels of your current toner cartridge. When your printer runs out of toner, the smart chip identifies the l...Read more »

  • How Long Does A Toner Cartridge Last?
    Post time: 01-23-2019

    Ever purchased a toner cartridge, expecting it to last a good few months for you, but only to find that you need to replace it again within a couple of weeks? You’re not the only one. So how long does a toner cartridge last? This question has puzzled printer users ever since the dawn of the lase...Read more »

  • 6 Steps On How To Resolve Brother Printer Not Detecting Ink Cartridge
    Post time: 01-16-2019

    Have you ever tried installing a new ink cartridge into your Brother printer but it tells you that it cannot detect it? This is not uncommon and normally it has nothing to do with the ink cartridge itself. If you install an ink cartridge that is (1) installed too quickly or (2) broken or damaged...Read more »

  • Why Choose Trusted Compatible Printer Cartridges?
    Post time: 01-14-2019

    Compatible cartridges are third-party versions of a branded toner cartridge or a branded ink cartridge, similar to the no-name or generic brands you see in your local supermarket for branded food labels. Many people stick with generic brands as they deliver similar print quality as a top brand w...Read more »

  • 6 Tips To Choose The Best Toner Cartridge For Your Printer
    Post time: 01-11-2019

    Since the advent of laser printers in the 1970’s, a lot of individuals, enterprises and organizations have switched to this type of printing technology because of its capability to print a high volume of pages at a much faster speed compared to inkjet printers but without compromising the print q...Read more »

  • 9 Best 3D Printing Software Tools To Facilitate Your 3D Printing
    Post time: 01-09-2019

    Now that you have your 3D printer at hand, you must be excited to get started in the magic world of 3D printing! However, to start your printing objects, you’ll need to invest in 3D printing software, as this will enable you to print a variety of 3D objects. To make the most out of your 3D printe...Read more »

  • How To Fix A Paper Jam On Desktop Inkjet Printer and Laser Printer
    Post time: 01-07-2019

    If you have ever operated a printer, you may have encountered a paper jam. At some point, some piece of paper has loaded off-kilter or wadded up inside the rollers. Most paper jams are straightforward mechanical problems, and removing the jammed paper and getting the printer back to working is re...Read more »

  • How To Make Generic Ink Cartridges Work On A HP Printer?
    Post time: 01-04-2019

    Oops! Your HP printer does not recognize ink cartridge! It’s fairly common to encounter the “Unrecognized Cartridge” or “Incompatible Ink Cartridge” error on the HP PhotoSmart C4640 and all other Photosmart, Deskjet, and Officejet printers. This type of error messages often appear after the print...Read more »

  • What Is 3D Printing and How Does 3D Printing Work?
    Post time: 01-02-2019

    What Is 3D Printing? 3D printing, also called Additive Manufacturing, is an innovative technology that enables you to create a physical 3D object from a digital model. It started in the 80’s under the name ‘rapid prototyping’ because this was the purpose of this technology: to prototype cheaper ...Read more »

  • 3 Must-Have 3D Printing Books
    Post time: 12-28-2018

    Need a straightforward guide to the magic world of 3D printing? Below are 3 must-have 3D printing books to feed your interest. Each of them will become a great resource for your 3D printing inquiries! 1. Make: Getting Started with 3D Printing This book is written by Liza Wallach Kloski and Nick ...Read more »

  • 6 Simple Ways On How To Reduce Office Supply Expenses
    Post time: 12-26-2018

    Every business would need office supplies, from the parish of a small town to the largest conglomerate in the city. One of the simplest ways to cut back your business budget and save money is to reduce office supply expenses. However, reducing office supply expenses doesn’t necessarily mean going...Read more »

  • 3D Printer Filament Comparison: PLA vs PLA+
    Post time: 12-24-2018

    In FDM printing, the two most common filament types are PLA and ABS. Both materials belong to thermoplastics, becoming malleable when exposed to high temperatures. However, PLA has an enhanced version, called PLA+, which is touted as having superior properties compared to regular PLA. In some cir...Read more »

  • 10 Christmas Cookie Cutters To 3D Print
    Post time: 12-21-2018

    Baking cookies is one of the most cherished traditions during Christmas. Today we explore 10 great Christmas cookie cutters to spice up your baking and indulging experience. Don’t stress! Christmas is around the corner, but each of these cookie cutters is a fast, easy print which will jazz up you...Read more »

  • 8 Must-Have Office Supplies For An Organized Workplace
    Post time: 12-19-2018

    If you’ve resolved to improve your organization at workplace, a quick search on Amazon or a trip to your local office supply store is a good first step. If you just feel overwhelmed by all of the options stick with the basics, take this list of 8 must-have office supplies with you to make the rig...Read more »

  • 12 Easy Ways On How To Organize Office Supplies
    Post time: 12-17-2018

    You do not need a desk to keep all your office supplies organized! Just get rid of unneeded items, be innovative with what space you have, and sort through the paperwork you’ve probably stacked up. You’ll then be able to find what you need exactly when you need them, no matter what you’re w...Read more »

  • 6 Tips On How To Save Money On Office Supplies
    Post time: 12-12-2018

    With everything else that your business spends money on, office supplies might seem like little change, but when you add up the expenses over the time span of a year, your business could be spending a lot more money than it is necessary. When left unchecked, these costs can significantly cut into...Read more »

  • 13 Inventive Bullet Journal Ideas To Help You Stay Organized
    Post time: 12-10-2018

    From a sticky note calender to a bullet journal notebook, TIANSE offer solutions for you to be more productive, organized and on-track every day. 01. Helpful Ways to Maximize the Impact of a Bullet Journal (Simple Weekly Layout Template from Kate Louise) A bullet journal is mainly a planner that...Read more »

  • How To Fix A Clogged 3D Printer Extruder
    Post time: 12-05-2018

    Your 3D printer must melt and extrude many kilograms of plastics during its lifetime. To make things more complex, all of this plastic must exit the extruder through a small hole only as big as a single grain of sand. Unavoidably, there may come a time where something goes wrong with this process...Read more »

123 Next > >> Page 1 / 3