PLA 3D Printing filamén (Beureum Tambaga)
- Model: TS-PLA-Red Copper
FITUR:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Panjelasan Produk
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
spésifikasi
| material | PLA (Polylactic asam) |
| warna | beureum Tambaga |
| beurat | 1kg (kira 2.2 lbs) |
| Diameter | 1.75mm (akurasi dimensi +/- 0.03mm) |
| Disarankeun Tonjolan / nozzle Suhu | 190°C - 220°C (374°F - 428°F ) |
| Disarankeun Base Lempeng / Print Pesanggrahan Suhu | No heated/(20 - 70)°C |
| nu melendung | Taya gelembung |
- Tinggi purity: PLA boga laju shrinkage lemah sareng eta ngalaksanakeun geulis ogé sanajan percetakan model nu leuwih gede.
- Kateguhan kuat: dijieun pikeun tolerances pisan kedap sarta rentang hawa extruder lega, sahingga pikeun percetakan 3D smoother, sarta masalah extruder nozzle pangsaeutikna.
- Kasaluyuan tinggi: Ka diterapkeun pikeun rupa-rupa printer FDM 3D, Makerbot, nepi tambah, Mendel, Prusa, runtuyan, jsb
- Sehat: Kabéh produk geus lulus RoHS diréktif, anu dijieun ku 100% asam polylactic.
- Kapadetan anu leutik sarta eta loba torek na langkung ekonomis nalika percetakan model nu leuwih gede.
spésifikasi
| material | PLA (Polylactic asam) |
| warna | Koneng |
| beurat | 1kg (kira 2.2 lbs) |
| Diameter | 1.75mm (akurasi dimensi +/- 0.03mm) |
| Disarankeun Tonjolan / nozzle Suhu | 190°C - 220°C (374°F - 410°F) |
| Disarankeun Base Lempeng / Print Pesanggrahan Suhu | No heated/(20 – 70)°C |
- Laju shrinkage lemah sareng eta ngalaksanakeun geulis ogé sanajan percetakan model nu leuwih gede.
- Tinggi cocog sareng rupa-rupa FDM13D printerMakerbot, nepi tambah, Mendel, Prusa, runtuyan, jsb
- Non toksik: Kabéh produk geus lulus RoHS diréktif, anu dijieun ku 100% asam polylactic.
- Kapadetan anu leutik sarta eta loba torek na langkung ekonomis nalika percetakan model nu leuwih gede.
- bahan baku ti AS. kalawan kinerja alus ramah-lingkungan.
- Filamén nyaeta mantri dibungkus jeung ngalembereh ogé.
- percetakan mulus tur sinambung tanpa clogging atawa gelembung masalah
- 24 x 7 Pro Rojongan Palanggan nyadiakeun solusi teknis.
