Pla 3D Khatiso li phutholohe (Gray)

Pla 3D Khatiso li phutholohe (Gray)
  • ሞዴል: TS-Pla-ea Bohlooho-1

LIKAROLOANA:

1. Recommended Extrusion / Nozzle Mocheso: 190 ° C - 210 ° C
2. Recommended Base Plate / Print Bed Mocheso: Ha ho e chesang / (50 - 80) ° C
3. Low sekhahla shrinkage le ho etsa ntle hantle le ha ho hatisa kholoanyane dikai.

Tlhaloso ea Sehlahisoa

ga tlhaloso

Boitsebiso bo Pla (Polylactic acid)
mala Gray
ሚዛን 1kg (hoo e ka bang 2.2 liponto)
bophara 1.75mm (tshwantshe selo sa tlhakore Nepahetseng +/- 0.03mm)
Recommended Extrusion / Nozzle Mocheso 190 ° C - 220 ° C (374 ° F - 428 ° F)
Recommended Base Plate / Print Bed Mocheso Ha ho e chesang / (50 - 80) ° C

 

  • Recommended Extrusion / Nozzle Mocheso: 190 ° C - 210 ° C
  • Recommended Base Plate / Print Bed Mocheso: Ha ho e chesang / (50 - 80) ° C
  • Tlaase sekhahla shrinkage le ho etsa ntle hantle le ha ho hatisa dikai kholoanyane.
  • Phahameng Lumellana le mefuta e fapaneng ya FDM20D printerMakerbot, UP mmoho, Mendel, Prusa, series, joalo-joalo
  • Bao e seng Che: All tsa lihlahisoa li fetile ho RoHS taelo, e entsoeng ka acid e 100% polylactic.
  • Segokanyipalo e nyenyane 'me e le bobebe haholo le ho feta litšenyehelo ha hatisa dikai kholoanyane.
  • Raw lintho tse bonahalang ho tswa ho USA. tikoloho e khahlang-ba botsoalle le tshebetso e ntle.
  • Li phutholohe ke ka mokhoa o laolehileng phuthetsoe le qhibiliha hantle.
  • Boreleli le e tsoelang pele ea khatiso ntle clogging kapa bubble bath taba
  • 24: x 7 Pro Customer Support fana ditharollo botekgeniki.

 









  • Previous:
  • Next: