PLA 3D Ukuphrinta intambo (Empunga)

PLA 3D Ukuphrinta intambo (Empunga)
  • Model: TS-PLA-Gray-1

EZIPHUMA:

1. Kunconywe extrusion / Nozzle lokushisa: 190 ° C - 210 ° C
2. Kunconywe Base Plate / Phrinta Umbhede lokushisa: Ayikho evuthayo / (50 - 80) ° C
3. okuphansi ukuncipha isilinganiso futhi wenza kahle kakhulu ngisho nalapho ukunyathelisa izincwajana ezingu-emikhulu onobuhle.

umkhiqizo incazelo

Ukucaciswa

Material PLA (Polylactic Acid)
Umbala Mpunga
isisindo 1kg (cishe 2.2 lbs)
ububanzi 1.75mm (Ukunemba D +/- 0.03mm)
Extrusion ezinconyiwe / Nozzle Temperature 190 ° C - 220 ° C (374 ° F - 428 ° F)
Ezinconyiwe Base Plate / Phrinta Umbhede Temperature Ayikho evuthayo / (50 - 80) ° C

 

  • Kunconywe extrusion / Nozzle lokushisa: 190 ° C - 210 ° C
  • Ezinconyiwe Base Plate / Phrinta Umbhede lokushisa: Ayikho evuthayo / (50 - 80) ° C
  • Okuphansi ukuncipha isilinganiso futhi wenza kahle kakhulu ngisho nalapho ukunyathelisa lab 'onobuhle emikhulu.
  • High Ihambisana ne ezihlukahlukene FDM20D printerMakerbot, UP plus, Mendel, Prusa, uchungechunge, njll
  • Non Toxic: Zonke imikhiqizo sengidlulile RoHS Directive, eyenziwe 100% polylactic acid.
  • Ubuningi incane futhi ulula kakhulu futhi ukonga ngaphezulu lapho ukuyiprinta onobuhle emikhulu.
  • impahla eluhlaza kusukela USA. imvelo-nobungane ukusebenza okuhle.
  • Intambo kuyinto Ngokuhleleka zihambisana futhi Melt kahle.
  • ukuphrinta Smooth futhi okuqhubekayo ngaphandle odla noma bubble udaba
  • 24 x 7 Pro Ukusekela Amakhasimende ukuhlinzeka izixazululo lobuchwepheshe.

 









  • Previous:
  • Okulandelayo: