Urutaung 3D Tā kakawaea (Grey)
- Tauira: TS-PLA-Gray
Tuhinga:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Whakaahuatanga hua
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Whakapūtātanga
| Material | Urutaung (Polylactic Waikawa) |
| Tae | Grey |
| Taumaha | 1KG (āhua 2.2 lbs) |
| diameter | 1.75mm (Te Tika ahu +/- 0.03mm) |
| Tangohanga Manakohia / pupuha Temperature | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
| Manakohia Plate Base / Print Temperature Bed | No heated/(20 – 70)°C |
- auau te na'ina'iraa iti, me te mahi i te reira tino pai noa, no te tā tauira nui.
- High Hototahi ki te momo o FDM20D printerMakerbot, UP me, Mendel, Prusa, raupapa, me ētahi atu
- Non täoke: katoa o ngā hua kua haere te RoHS fakahinohino, hanga e 100% waikawa polylactic.
- He iti kiato, me te ko reira nui mama me ake economical ka tā tauira nui.
- rauemi Raw i USA. taiao-hoa ki pai ana te whakahaere.
- He pehea takaia, ka harotu pai kakawaea.
- tā Smooth me tonu, kahore tanumia miru ranei take
- 24 x 7 Tautoko Kiritaki Pro whakarato rongoā hangarau.
