PETG 3D Clò-bhualadh Filament (Soilleir)
- Modail: TS-PETG-Clear
CHOMHARRAN:
Material: PETG.
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 220°C - 260°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
bathar Tuairisgeul
Sònrachadh
Dùthchasach | PETG |
Color | soilleir |
Weight | 1KG (mu 2.2 puinnd) |
trast-thomhas | 1.75mm (thaobhach mionaideachd +/- 0.03mm) |
Moladh Extrusion / Nozzle Teòthachd | C 220 ° - 260 ° C |
Moladh Base Plate / Clò-bhuail Teòthachd Bed | Chan eil an teasachadh / (50 - 80) ° C |
Bubble | No builgean |
- Àrd-gheal: PETG ìosal shrinkage ìre àrd transmittance, fiù 's na bu mhotha na clò-bhuailibh modailean' coileanadh gu math.
- Strong TOUGHNESS: saothraichte gu math teann agus feumalachdan farsaing extruder Teòthachd raon, àrd cruas, a 'dèanamh airson fhasa 3D clò-bhualadh, agus nas lugha de extruder nozzle duilgheadasan.
- Àrd-fhreagarrachd: Airson a chur ri caochladh FDM 3D clò-bhualadair, Makerbot, UP plus, Mendel, Prusa, sreath, etc.
- Healthy: a h-uile bathar air a dhol seachad an RoHS Riaghailt, a dhèanamh le 100% polylactic acid.
- Dùmhlachd beag, nuair a chlò-bhualadh nas motha leabhar modail aotruime, chùramach.