PETG 3D Khatiso li phutholohe (Hlakileng)
- ሞዴል: TS-PETG-Clear
LIKAROLOANA:
Material: PETG.
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 220°C - 260°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Tlhaloso ea Sehlahisoa
ga tlhaloso
Boitsebiso bo | PETG |
mala | hlakile |
ሚዛን | 1kg (hoo e ka bang 2.2 liponto) |
bophara | 1.75mm (tshwantshe selo sa tlhakore Nepahetseng +/- 0.03mm) |
Recommended Extrusion / Nozzle Mocheso | 220 ° C - 260 ° C |
Recommended Base Plate / Print Bed Mocheso | Ha ho e chesang / (50 - 80) ° C |
take bubble | Ha ho se ome mathe |
- Phahameng Hloekileng: PETG na sekhahla tlaase shrinkage, phahameng transmittance, esita le hatisa dikai kholoanyane phetha hantle.
- Matla Toughness: etsoa ho tolerances thata haholo le mefuta e extruder mocheso mefuta e fapaneng, e phahameng thatafala, e etsa bakeng sa khatiso boreleli 3D, 'me ba ka tlaase mathata extruder nozzle.
- Phahameng sa tshebeletsano: Ho sebelisoa mefuta e fapaneng ya hatisang mrf matlab 3D, Makerbot, UP mmoho, Mendel, Prusa, series, joalo-joalo
- Healthy: All tsa lihlahisoa li fetile ho RoHS taelo, e entsoeng ka acid e 100% polylactic.
- Segokanyipalo e nyenyane, ha ho hatisa kholoanyane bophahamo ba modumo ea mohlala bobebe, litšenyehelo.