Printer ink is notorious for being expensive, figuratively speaking, more expensive than human blood. With printer ink costing at least twice as much as premium champagne, you’ll undoubtedly want to squeeze every drop of ink out of your cartridge and get every drop’s worth. In this article, we’ll introduce you some color ink cartridge trick on how to get every last drop of ink out of your cartridge.
1. Print Head Cleaning
Sometimes, you may think you’re running low on ink when you start getting streaky prints, but it may only be down to the fact that your print head needs cleaning. There are a few methods to fix this but the simplest way is to run your printer’s print head cleaning feature for removal of dried ink in the print head. This typically occurs when your printer hasn’t been used for awhile.
2. Give It A Shake
When your prints start to look faded, it’s not always because your ink cartridges are running empty. Sometimes it could be due to the fact that some of the ink has dried up and is clogging the nozzles. You can try flipping the cartridge upside down and then shake it gently to redistribute the ink.
3. Cover the Contacts
There are probably some copper or gold contacts on your printer cartridge. If it doesn’t work by shaking the cartridge, you can put a piece of Scotch tape over these contacts to trick the sensors in the system. Often, this will also trick the system into allowing you to finish up your printing job. In this case, you’d be able to run the printer until the cartridge is truly empty.
4. Hair Dryer Trick
If neither the shaking nor the tape trick works, there’s still another option to try. Leave the Scotch tape over the contacts, but run a hair dryer over the cartridge until it’s warm to the touch. While it’s still heated up, put it back into the printer and restart the job. Blowing the nozzles with hot air may loosen up the leftover ink and enable the rest of the ink to flow once again.
5. Paper Tower Trick
Similar to the hair dryer trick, the paper towel trick also aims to clear out dried ink from the nozzles to enable the rest of the ink to come out.
Important Note:
You should be aware that when your ink cartridge is truly empty. When it’s indeed empty, be sure to change it immediately. If you continue to print on a depleted cartridge, it may cause your print head to melt and thus damage your printer. It always pays to have a spare cartridge on hand when your ink cartridges are truly empty.
One solution to make sure you always have a spare cartridge without overrunning your budget is to purchase compatible ink cartridges which usually cost far more less than OEM cartridges but still giving you the same clear, quality prints you’ve come to expect from OEM cartridges.
As economic and ecological as squeezing printer ink down to the last drop might be, eventually you will have to admit defeat and shop a new cartridge. No amount of hair dryer trick and shaking will force your printer cartridge to become a bottomless pit of ink! However, we hope you can still learn something about color ink cartridge trick from this article.
Post time: Mar-27-2019