PLA 3D Printing filament (Orange Red)
- Model: TS-PLA-Orange Red
atụmatụ:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Tlhaloso ea Sehlahisoa
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
nkọwapụta
| ihe | PLA (Polylactic Acid) |
| agba | Orange Red |
| ibu | 1KG (ihe dị ka 2.2 lbs) |
| dayameta | 1.75mm (akụkụ nke ziri ezi na +/- 0.03mm) |
| Na-atụ aro extrusion / nozulu okpomọkụ | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
| Na-atụ aro Base efere / Print ndina okpomọkụ | No heated/(20 – 50)°C |
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- Low shrinkage ọnụego na ọ rụrụ mara nke ọma ọbụna mgbe ibi akwụkwọ ibu ụdị.
- High Ò Kwekọrọ n'Ozizi na a dịgasị iche iche nke FDM22D printerMakerbot, UP plus, Mendel, Prusa, usoro, wdg
- Non Nsí Achọ: All nke ngwaahịa na ha agafeela RoHS ntụziaka, mere site 100% polylactic acid.
- Njupụta bụ obere na ọ bụ ọtụtụ Mkpa ọkụ na ndị ọzọ echekwa mgbe ibi akwụkwọ ibu ụdị.
- Raw ihe ọmụma si na USA. gburugburu ebe obibi-enyi na enyi na ezi arụmọrụ.
- Filament bụ n'usoro ọbọp na gbazee ọma.
- Ezigbo na-aga n'ihu-ebi akwụkwọ na-enweghị clogging ma ọ bụ afụ nke
- 24 x 7 Pro Nkwado Ndị Ahịa na-enye oru ngwọta.
