PLA 3D Ukuphrinta intambo (Izinkuni)
- Model: TS-PLA-Wood
EZIPHUMA:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
umkhiqizo incazelo
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Ukucaciswa
| Material | PLA (Polylactic Acid) |
| Umbala | izinkuni |
| isisindo | 1kg (cishe 2.2 lbs) |
| ububanzi | 1.75mm (Ukunemba D +/- 0.03mm) |
| Extrusion ezinconyiwe / Nozzle Temperature | 200°C - 220°C (210°C preferred) |
| Ezinconyiwe Base Plate / Phrinta Umbhede Temperature | 30 - 50°C |
| Ezinconyiwe nozzel ubukhulu | 0.5mm noma ngaphezulu |
| Phrinta ungqimba ukushuba | hhayi ngaphansi kuka 0.25 mm |
| Phrinta kuma lokushisa | 20 - 26°C |
| bubble | Ayikho bubble |
- Uhlanzekile okuphezulu: PLA inesikhala esincane ukuncipha isilinganiso futhi wenza kahle kakhulu ngisho nalapho ukunyathelisa lab 'onobuhle emikhulu.
- Ubunzima eqinile: Manufactured ukuba tolerances Friend kakhulu futhi ebanzi extruder lokushisa ububanzi, ezibangela bushelelezi ukuphrinta 3D, nokumbalwa izinkinga extruder umlomo wombhobho.
- Ukuhambelana okuphezulu: Ukuze ozofakwa ezihlukahlukene FDM 3D iphrinta, Makerbot, UP plus, Mendel, Prusa, uchungechunge, njll
- Ubuningi incane futhi ulula kakhulu futhi ukonga ngaphezulu lapho ukuyiprinta onobuhle emikhulu.
