Pla 3D Printing cingwana (Wood)
- Model: TS-PLA-Wood
IIMBONAKALO:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Ingcaciso yeMveliso
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Ukucaciswa
material | Pla (Polylactic Acid) |
umbala | Wood |
Weight | 1kg (malunga ne-2.2 lbs) |
ubukhulu | 1.75mm (Ukuchaneka D +/- 0.03mm) |
Extrusion okunikezelwe / umlomo Ubushushu | 200°C - 220°C (210°C preferred) |
Kunconywa Base Plate / Shicilela Ibhedi Ubushushu | 30 - 50°C |
Kunconywa nozzel ubukhulu | 0.5mm okanye ngaphezulu |
Shicilela layer ubukhulu | kungabi ngaphantsi kwe 0.25 mm |
kokugquma lobushushu Shicilela | 20 - 26°C |
bubble | akukho bubble |
- Purity High: Pla uye rate shrinkage eliphantsi kwaye lenza pretty kakuhle naxa kushicilelwa imifuziselo ezinkulu.
- Ubulukhuni Strong: Umthuthi ukuba nokumelana yengqingqwa kunye olubanzi uluhlu lobushushu extruder, okwenza ukuba yoshicilelo Ubuthelezi 3D, kunye neengxaki extruder umlomo ezimbalwa.
- Ukuhambelana High: Ukuze isetyenziswe kwiintlobo ngeentlobo yomshicileli FDM 3D, Makerbot, UP dibanisa, Mendel, Prusa, series, njl
- Konga amancinci kwaye kukhanya nenoqoqosho ngakumbi xa kushicilelwa imifuziselo ezinkulu kakhulu.