Pla 3D Printing cingwana (Umbala Skin)

Pla 3D Printing cingwana (Umbala Skin)
  • Model: TS-Pla-Skin Color-1

IIMBONAKALO:

1. ezicetyiswayo extrusion / umlomo lobushushu: 190 ° C - 210 ° C
2. ezicetyiswayo Base Plate / Shicilela Ibhedi lobushushu: Akukho shushu / (50 - 80) ° C
3. rate shrinkage ephantsi lenza pretty kakuhle naxa kushicilelwa ezinkulu imifanekiso.

Ingcaciso yeMveliso

Ukucaciswa

material Pla (Polylactic Acid)
umbala Umbala Skin
Weight 1kg (malunga ne-2.2 lbs)
ubukhulu 1.75mm (Ukuchaneka D +/- 0.03mm)
Extrusion okunikezelwe / umlomo Ubushushu 190 ° C - 220 ° C (374 ° F - 428 ° F)
Kunconywa Base Plate / Shicilela Ibhedi Ubushushu Akukho shushu / (50 - 80) ° C

 

  • Ezicetyiswayo Ubushushu extrusion / umlomo: 190 ° C - 210 ° C
  • Kunconywa Base Plate / Shicilela Ibhedi lobushushu: Akukho shushu / (50 - 80) ° C
  • rate shrinkage ephantsi lenza pretty kakuhle naxa kushicilelwa imifuziselo ezinkulu.
  • High Ihambisana kunye ezahlukeneyo FDM12D printerMakerbot, UP dibanisa, Mendel, Prusa, series, njl
  • Non enetyhefu: Zonke imveliso sele kudlule i RoHS Directive, eyenziwe 100% polylactic acid.
  • Konga amancinci kwaye kukhanya nenoqoqosho ngakumbi xa kushicilelwa imifuziselo ezinkulu kakhulu.
  • izinto ekrwada ukusuka USA. indawo-friendly kunye nokusebenza kakuhle.
  • Ntambo Ulandelelwano zihambisana futhi anyibilike kakuhle.
  • yoshicilelo okungenamagingxi-gingxi ngokuqhubekayo ngaphandle odla okanye kwiqamza umba
  • 24 x 7 Inkxaso Customer Pro ekunikeni izisombululo zobugcisa.

 









  • Previous:
  • Next: