Pla 3D Printing cingwana (Mnyama) 2.85 mm
- Model: TS-PLA-Black-2.85mm
IIMBONAKALO:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/ 11pounds
Item Diameter: 2.85 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Ingcaciso yeMveliso
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Ukucaciswa
| material | Pla (Polylactic Acid) |
| umbala | Mnyama |
| Weight | 1kg (malunga ne-2.2 lbs) |
| ubukhulu | 2.85mm (Ukuchaneka D +/- 0.03mm) |
| Extrusion okunikezelwe / umlomo Ubushushu | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
| Kunconywa Base Plate / Shicilela Ibhedi Ubushushu | No heated/(20 – 70)°C |
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- rate shrinkage ephantsi lenza pretty kakuhle naxa kushicilelwa imifuziselo ezinkulu.
- High Ihambisana kunye ezahlukeneyo FDM25D printerMakerbot, UP dibanisa, Mendel, Prusa, series, njl
- Non enetyhefu: Zonke imveliso sele kudlule i RoHS Directive, eyenziwe 100% polylactic acid.
- Konga amancinci kwaye kukhanya nenoqoqosho ngakumbi xa kushicilelwa imifuziselo ezinkulu kakhulu.
- izinto ekrwada ukusuka USA. indawo-friendly kunye nokusebenza kakuhle.
- Ntambo Ulandelelwano zihambisana futhi anyibilike kakuhle.
- yoshicilelo okungenamagingxi-gingxi ngokuqhubekayo ngaphandle odla okanye kwiqamza umba
- 24 x 7 Inkxaso Customer Pro ekunikeni izisombululo zobugcisa.
