Intambo 6 Umbala Pla 3D Printing isuti
- Model: TS-PLA-6 Colors
IIMBONAKALO:
1. MULTI-COLOR asolwa Pack: 6 imibala eziphambili: Black, White, Red, Blue, Isilivere Green
2. Non eyityhefu: Zonke imveliso sele kudlule i RoHS Directive, eyenziwe 100% polylactic acid
3. yoshicilelo okungenamagingxi-gingxi ngokuqhubekayo ngaphandle Ukuxinana okanye bubble umba
Ingcaciso yeMveliso
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Ukucaciswa
material | Pla (Polylactic Acid) |
umbala | 6 umbala sihambelane (Black + White + Red + Blue + Silver + Green) |
ubukhulu | 1.75mm (Ukuchaneka D +/- 0.03mm) |
Extrusion okunikezelwe / umlomo Ubushushu | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
Kunconywa Base Plate / Shicilela Ibhedi Ubushushu | No heated/(20 – 70)°C |
- MULTI-IMIBALA neentlobontlobo Pack: 6 imibala eziphambili: Black, White, Red, Blue, Isilivere Green
- Non enetyhefu: Zonke imveliso sele kudlule i RoHS Directive, eyenziwe 100% polylactic acid
- yoshicilelo okungenamagingxi-gingxi ngokuqhubekayo ngaphandle odla okanye kwiqamza umba
- rate shrinkage ephantsi lenza pretty kakuhle naxa kushicilelwa models ezinkulu
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- High Ihambisana kunye ezahlukeneyo yomshicileli FDM 3D, Makerbot, UP dibanisa, Mendel, Prusa, series, njl