PLA 3D Chop Filament (Black) 2.85 mm
- Model: TS-PLA-Black-2.85mm
XUSUSIYATLARI:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/ 11pounds
Item Diameter: 2.85 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Mahsulot tavsifi
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
spetsifikatsiyasi
| ashyo | PLA (Polylactic kislota) |
| rang | qora |
| vazn | 1KG (taxminan 2,2 lbs) |
| diametr | 2.85mm (boyutsal adolat +/- 0,03 mm'dir) |
| Tavsiya Extrusion / chiqish harorati | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
| Tavsiya Base laganning / Chop etish To'shak Harorat | No heated/(20 – 70)°C |
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- Past olish darajasi va katta modellari chop hatto juda yaxshi amalga oshiradi.
- boshqalar FDM25D printerMakerbot, PF Plus, Mendel, Prusa, ketma-ket, turli xil bilan mos yuqori
- Toksik bo'lmagan: mahsulotlari Barcha 100% polylactic kislotasi tomonidan amalga RoHS, o'tgan.
- Zichlik kichik va ancha engil va katta modellari qo'yarkan ko'proq iqtisodiy bo'ladi.
- AQSh xomashyo. Atrof-muhit-do'stona yaxshi ishlashi bilan.
- Tola o'ralgan va yaxshi Erish qat'iy hisoblanadi.
- Tıkanma yoki ko'pik masala holda silliq va uzluksiz istibdodga
- texnik yechimlarni taqdim 24 x 7 Pro Mijozlar qo'llab-quvvatlash.
