PLA 3D Printing Filament (Violet)
- Model: TS-PLA-Violet
VIPENGELE:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Maelezo ya bidhaa
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
vipimo
| Material | PLA (polylactic Acid) |
| Rangi | Violet |
| Uzito | 1kg (takriban 2.2 lbs) |
| kipenyo | 1.75mm (Dimensional Usahihi +/- 0.03mm) |
| Iliyopendekezwa Extrusion / Nozzle Joto | 190°C - 220°C (374°F - 410°F) |
| Iliyopendekezwa Msingi Bamba / Print Kitanda Joto | No heated/(20 – 70)°C |
- Chini ya kiwango cha shrinkage na hufanya pretty vizuri hata wakati wa kuchapisha mifano kubwa.
- High Sambamba na aina ya FDM13D printerMakerbot, UP kuongeza, Mendel, Prusa, mfululizo, nk
- Mashirika Sumu: Wote wa bidhaa kupita direktivet RoHS, yaliyotolewa na asidi 100% polylactic.
- Density ni ndogo na ni nyepesi sana na zaidi ya kiuchumi wakati wa kuchapisha mifano kubwa.
- Raw nyenzo kutoka USA. mazingira ya kirafiki na utendaji mzuri.
- Filament ni wenye Mpangilio amefungwa na Kuyeyuka pia.
- Smooth na kuendelea kuchapa bila clogging au Bubble suala
- 24 x 7 Pro Wateja Support kutoa ufumbuzi wa kiufundi.
