PLA 3D Printing Filament (Blue)
- Model: TS-PLA-Blue
VIPENGELE:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Maelezo ya bidhaa
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
vipimo
Material | PLA (polylactic Acid) |
Rangi | Blue |
Uzito | 1kg (takriban 2.2 lbs) |
kipenyo | 1.75mm (Dimensional Usahihi +/- 0.03mm) |
Iliyopendekezwa Extrusion / Nozzle Joto | 190°C - 220°C (374°F - 428°F ) |
Iliyopendekezwa Msingi Bamba / Print Kitanda Joto | No heated/(20 - 70)°C |
Bubble | hakuna Bubble |
- High Usafi: PLA ina kiwango cha chini shrinkage na hufanya pretty vizuri hata wakati wa kuchapisha mifano kubwa.
- Nguvu Toughness: Viwandani kwa tolerances tight sana na pana extruder joto mbalimbali, na kufanya kwa kuchapa laini 3D, na chache matatizo extruder pua.
- High Utangamano: Kwa kutumika kwa aina mbalimbali za mashine FDM 3D, MakerBot, UP kuongeza, Mendel, Prusa, mfululizo, nk
- Afya: Kwa bidhaa na kupita direktivet RoHS, yaliyotolewa na asidi 100% polylactic.
- Density ni ndogo na ni nyepesi sana na zaidi ya kiuchumi wakati wa kuchapisha mifano kubwa.