Pla 3D Khatiso li phutholohe (Black) 2.85 limilimithara
- ሞዴል: TS-PLA-Black-2.85mm
LIKAROLOANA:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/ 11pounds
Item Diameter: 2.85 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Tlhaloso ea Sehlahisoa
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
ga tlhaloso
| Boitsebiso bo | Pla (Polylactic acid) |
| mala | Black |
| ሚዛን | 1kg (hoo e ka bang 2.2 liponto) |
| bophara | 2.85mm (tshwantshe selo sa tlhakore Nepahetseng +/- 0.03mm) |
| Recommended Extrusion / Nozzle Mocheso | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
| Recommended Base Plate / Print Bed Mocheso | No heated/(20 – 70)°C |
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- Tlaase sekhahla shrinkage le ho etsa ntle hantle le ha ho hatisa dikai kholoanyane.
- Phahameng Lumellana le mefuta e fapaneng ya FDM25D printerMakerbot, UP mmoho, Mendel, Prusa, series, joalo-joalo
- Bao e seng Che: All tsa lihlahisoa li fetile ho RoHS taelo, e entsoeng ka acid e 100% polylactic.
- Segokanyipalo e nyenyane 'me e le bobebe haholo le ho feta litšenyehelo ha hatisa dikai kholoanyane.
- Raw lintho tse bonahalang ho tswa ho USA. tikoloho e khahlang-ba botsoalle le tshebetso e ntle.
- Li phutholohe ke ka mokhoa o laolehileng phuthetsoe le qhibiliha hantle.
- Boreleli le e tsoelang pele ea khatiso ntle clogging kapa bubble bath taba
- 24: x 7 Pro Customer Support fana ditharollo botekgeniki.
