PETG 3D Khatiso li phutholohe (Yellow)
- ሞዴል: TS-PETG-Yellow
LIKAROLOANA:
Material: PETG.
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 220°C - 260°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Tlhaloso ea Sehlahisoa
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
ga tlhaloso
| Boitsebiso bo | PETG |
| mala | Yellow |
| ሚዛን | 1kg (hoo e ka bang 2.2 liponto) |
| bophara | 1.75mm (tshwantshe selo sa tlhakore Nepahetseng +/- 0.03mm) |
| Recommended Extrusion / Nozzle Mocheso | 220°C - 260°C |
| take bubble | Ha ho se ome mathe |
- Phahameng Hloekileng: PETG na sekhahla tlaase shrinkage, phahameng transmittance, esita le hatisa dikai kholoanyane phetha hantle.
- Matla Toughness: etsoa ho tolerances thata haholo le mefuta e extruder mocheso mefuta e fapaneng, e phahameng thatafala, e etsa bakeng sa khatiso boreleli 3D, 'me ba ka tlaase mathata extruder nozzle.
- Phahameng sa tshebeletsano: Ho sebelisoa mefuta e fapaneng ya hatisang mrf matlab 3D, Makerbot, UP mmoho, Mendel, Prusa, series, joalo-joalo
- Healthy: All tsa lihlahisoa li fetile ho RoHS taelo, e entsoeng ka acid e 100% polylactic.
- Segokanyipalo e nyenyane, ha ho hatisa kholoanyane bophahamo ba modumo ea mohlala bobebe, litšenyehelo.
