Pla 3D Printing Filament (Wood)
- Model: TS-PLA-Wood
ZVAIZOITIKA:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Product Description
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Specification
| zvinhu | Pla (Polylactic acid) |
| ruvara | danda |
| uremu | 1KG (anenge 2.2 LBS) |
| dhayamita | 1.75mm (ndeiya yakaita Akarurama +/- 0.03mm) |
| Recommended Extrusion / kamwene Temperature | 200°C - 220°C (210°C preferred) |
| Recommended Base Plate / Print Bed Temperature | 30 - 50°C |
| Recommended Nozzel dhayamita | 0.5mm kana kupfuura |
| Print rukoko ukobvu | kwete asingasviki 0.25 mm |
| Print ambient tembiricha | 20 - 26°C |
| dhudhumira | No dhudhumira |
- High Chakachena: pla ane pasi shrinkage mwero uye anoita zvakanaka zvakanaka kunyange kana kudhinda kurei yokutevedzera.
- Kusimba Strong: kugadzirwa kuti zvakasimba chaizvo tolerances uye navanopinda extruder tembiricha siyana, zvichiita kuti unotedza 3D kudhinda, uye vashoma matambudziko extruder kamwene.
- High kugarisana: Kuti kureva zvakasiyana-siyana FDM 3D, aidhinda Makerbot, UP plus Mendel, Prusa, series, etc.
- Density muduku uye zviri kupenya kwazvo uye mari yakawanda kana kudhinda kurei yokutevedzera.
