PLA 3D yosindikiza filament (Khungu)

PLA 3D yosindikiza filament (Khungu)
  • Model: TS-PLA-Khungu-1

MAWONEKEDWE:

1. Analimbikitsa Extrusion / Nozzle Kutentha: 190 ° C - 210 ° C
2. Analimbikitsa Base mbale / Sindikizani Kama Kutentha: No mkangano / (50 - 80) ° C
3. Low mlingo shrinkage ndipo amachita wokongola bwino ngakhale pamene makina akuluakulu zitsanzo.

Mafotokozedwe Akatundu

mfundo

Zinthu Zofunika PLA (Polylactic acid)
mtundu khungu
Kunenepa 1KG (pafupifupi 2.2 lbs)
awiri 1.75mm (ooneka enieni Zowona +/- 0.03mm)
Analimbikitsa Extrusion / Nozzle Kutentha 190 ° C - 220 ° C (374 ° F - 428 ° F)
Analimbikitsa Base mbale / Sindikizani Kama Kutentha No mkangano / (50 - 80) ° C

 

  • Analimbikitsa Extrusion / Nozzle Kutentha: 190 ° C - 210 ° C
  • Analimbikitsa Base mbale / Sindikizani Kama Kutentha: No mkangano / (50 - 80) ° C
  • Low mlingo shrinkage ndipo amachita wokongola bwino ngakhale pamene makina zitsanzo zikuluzikulu.
  • Mkulu Yogwirizana ndi zosiyanasiyana FDM12D printerMakerbot, PA kuphatikiza, Mendel, Prusa, zino, etc.
  • Non Otani: Onse katundu zapita pa RoHS lamulo, zopangidwa ndi asidi 100% polylactic.
  • Kachulukidwe ndi zazing'ono ndipo ndi opepuka kwambiri ndi kwambiri ndalama pamene makina zitsanzo zikuluzikulu.
  • Zopangira ku USA. chilengedwe Ndi ochezeka ndi ntchito zabwino.
  • Filament ndi Bata wokutidwa ndi Sungunulani bwino.
  • Yosalala ndi mosalekeza yosindikiza popanda clogging kapena kuwira nkhani
  • 24 × 7 ovomereza kasitomala Support kupereka njira luso.

 









  • Previous:
  • Kenako: