PLA 3D Prentun filament (Rjómalöguð hvítur)
- Gerð: TS-PLA-Creamy White
Eiginleikar:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
Vörulýsing
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
forskrift
efni | PLA (pólýmjólkursýra) |
Litur | Rjómalöguð hvítur |
þyngd | 1kg (um það bil 2,2 lbs) |
þvermál | 1.75mm (víddar nákvæmni +/- 0.03mm) |
Ráðlögð extrusion / Stútur Temperature | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
Ráðlögð Base Plate / Print Bed Temperature | No heated/(20 – 50)°C |
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- Lítil rýrnun krónunnar og það virkar mjög vel, jafnvel þegar prentun stærri módel.
- High Samhæft með ýmsum FDM22D printerMakerbot, UP plús, Mendel, Prusa, röð, osfrv
- Non Toxic: Allar vörur hafa staðist RoHS tilskipun, úr því 100% polýlactínsýru.
- Þéttleiki er lítill og það er miklu léttara og hagstæðari þegar prentun stærri módel.
- Hráefni frá USA. umhverfi-vingjarnlegur með góðum árangri.
- Filament er reglusamur pakkað og bræða vel.
- Slétt og samfelld prentun án clogging eða kúla útgáfu
- 24 x 7 Pro þjónustufulltrúar veita tæknilegar lausnir.