PLA 3D Printing filament (Skin Agba)

PLA 3D Printing filament (Skin Agba)
  • Model: TS-PLA-Skin Agba-1

atụmatụ:

1. Na-atụ aro extrusion / nozulu okpomọkụ: 190 ° C - 210 ° C
2. aro Base efere / Print ndina okpomọkụ: Ọ dịghị kpụ ọkụ n'ọnụ / (50 - 80) ° C
3. Low shrinkage ọnụego na ọ rụrụ mara nke ọma ọbụna mgbe ibi akwụkwọ ibu ụdị.

Tlhaloso ea Sehlahisoa

nkọwapụta

ihe PLA (Polylactic Acid)
agba Skin Agba
ibu 1KG (ihe dị ka 2.2 lbs)
dayameta 1.75mm (akụkụ nke ziri ezi na +/- 0.03mm)
Na-atụ aro extrusion / nozulu okpomọkụ 190 ° C - 220 ° C (374 ° F - 428 ° F)
Na-atụ aro Base efere / Print ndina okpomọkụ Ọ dịghị kpụ ọkụ n'ọnụ / (50 - 80) ° C

 

  • Na-atụ aro extrusion / nozulu okpomọkụ: 190 ° C - 210 ° C
  • Na-atụ aro Base efere / Print ndina okpomọkụ: Ọ dịghị kpụ ọkụ n'ọnụ / (50 - 80) ° C
  • Low shrinkage ọnụego na ọ rụrụ mara nke ọma ọbụna mgbe ibi akwụkwọ ibu ụdị.
  • High Ò Kwekọrọ n'Ozizi na a dịgasị iche iche nke FDM12D printerMakerbot, UP plus, Mendel, Prusa, usoro, wdg
  • Non Nsí Achọ: All nke ngwaahịa na ha agafeela RoHS ntụziaka, mere site 100% polylactic acid.
  • Njupụta bụ obere na ọ bụ ọtụtụ Mkpa ọkụ na ndị ọzọ echekwa mgbe ibi akwụkwọ ibu ụdị.
  • Raw ihe ọmụma si na USA. gburugburu ebe obibi-enyi na enyi na ezi arụmọrụ.
  • Filament bụ n'usoro ọbọp na gbazee ọma.
  • Ezigbo na-aga n'ihu-ebi akwụkwọ na-enweghị clogging ma ọ bụ afụ nke
  • 24 x 7 Pro Nkwado Ndị Ahịa na-enye oru ngwọta.

 









  • Previous:
  • Next: