PLA PRO 3D Bugun filament (Yellow)

PLA PRO 3D Bugun filament (Yellow)
  • Model: TS-PLA + YE

fasali:

1.PLA + ne mafi m da kuma kwari fiye da al'ada PLA.
2.Last daina bayan bude injin shãfe haske pacakge da kasa clogging
3.Filament nauyi 1Sar (2.20 lbs), diamita 1.75Mm (girma daidaito +/- 0.03Mm)
4.Recommended bututun ƙarfe zazzabi 180 ° C - 210 ° C (356 ° f - 415 ° F)

samfurin Description

Musammantawa

TIANSE PLA + aka tsara don warware matsalolin mutane sau da yawa saduwa a lokacin bugu. PLA + iya šauki tsawon (fiye da watanni 3) bayan bude injin shãfe haske kunshin. Yawan zafin jiki kula PLA + ne yafi kwari yayin da bugu da yawan zafin jiki na PLA sau da yawa dabam a daban-daban batches. Non clogging saboda ta kwari bugu da yawan zafin jiki. Clogging da wuya ya faru.

Material PLA PRO
launi yellow
Weight 1Sar (2.20 lbs)
diamita 1.75mm (girma Kauce wa kuskure +/- 0.03mm)
Shawarar extrusion / bututun ƙarfe Temperatuur 180 ° C - 210 ° C (356 ° F - 415 ° F)
  • PLA + ne mafi m da kuma kwari fiye da al'ada PLA.
  • Šauki tsawon bayan bude injin shãfe haske pacakge da kasa clogging
  • Filament nauyi 1Sar (2.20 lbs), diamita 1.75Mm (girma daidaito +/- 0.03Mm)
  • Shawarar bututun ƙarfe zazzabi 180 ° C - 210 ° C (356 ° F - 415 ° F)
  • Spool diamita: 7,72 "/ spool fadin: 2,88" / spool cibiya rami diamita: 2.7 "









  • Previous:
  • Next: