PLA 3D Bugun filament 6 Color Suit
- Misali: TS-PLA-6 Colors
fasali:
1. Multi-launi tsari Pack: 6 babban launuka: Black, White, Red, Blue, Azurfa da kuma Green
2. Non mai guba: Duk kayayyakin sun shũɗe da RoHS zartarwan, sanya ta 100% polylactic acid
3. Bayar da kuma ci gaba da bugu ba tare da clogging ko kumfa batun
samfurin Description
Kasuwancin Duniya na Amazon
Mai zuwa shine yanayin tallan samfuranmu akan Amazon. Idan kuna da needsan buƙatu, zaku iya zaɓar shafin da ya dace don siyayya. Idan kana da buƙatun girma masu yawa, da fatan za a tuntube mu, za mu samar maka da farashi masu ƙima.
(Duk samfuran yanar gizon ana siyar dasu a duniya)
Musammantawa
| Kayan aiki | PLA (Polylactic Acid) |
| launi | 6 Color Suit (Black + White + Red + Blue + Azurfa + Green) |
| diamita | 1.75mm (girma Kauce wa kuskure +/- 0.03mm) |
| Shawarar extrusion / bututun ƙarfe Temperatuur | 190 ° C - 220 ° C (374 ° F - 428 ° F) |
| Shawarar Base Plate / Print Bed Temperatuur | Babu mai zafi / (20 - 70) ° C |
- Multi-launi tsari Pack: 6 babban launuka: Black, White, Red, Blue, Azurfa da kuma Green
- Non mai guba: Duk kayayyakin sun shũɗe da RoHS zartarwan, sanya ta 100% polylactic acid
- Bayar da kuma ci gaba da bugu ba tare da clogging ko kumfa batun
- Low shrinkage kudi da kuma shi aikin kyawawan kyau ko da a lokacin da buga fi girma model
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- High Dace da wani iri-iri FDM 3D printer, Makerbot, UP da, Mendel, Prusa, series, da dai sauransu.
