PLA 3D Clò-bhualadh Filament (Wood)
- Modail: TS-PLA-Wood
CHOMHARRAN:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
bathar Tuairisgeul
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Sònrachadh
| Dùthchasach | PLA (Polylactic Acid) |
| Color | Wood |
| Weight | 1KG (mu 2.2 puinnd) |
| trast-thomhas | 1.75mm (thaobhach mionaideachd +/- 0.03mm) |
| Moladh Extrusion / Nozzle Teòthachd | 200°C - 220°C (210°C preferred) |
| Moladh Base Plate / Clò-bhuail Teòthachd Bed | 30 - 50°C |
| Moladh nozzel trast-thomhas | 0.5mm no os a chionn |
| Clò-bhuail filleadh tiughad | nach eil nas lugha na 0,25 mm |
| Clò-bhuail Ambient Teòthachd | 20 - 26°C |
| Bubble | No builgean |
- Àrd-gheal: PLA ìosal shrinkage ìre agus tha e a 'dèanamh gu math breagha fiù' s nuair a chlò-bhualadh nas motha modailean.
- Strong TOUGHNESS: saothraichte gu math teann agus feumalachdan farsaing extruder Teòthachd raon, a 'dèanamh airson fhasa 3D clò-bhualadh, agus nas lugha de extruder nozzle duilgheadasan.
- Àrd-fhreagarrachd: Airson a chur ri caochladh FDM 3D clò-bhualadair, Makerbot, UP plus, Mendel, Prusa, sreath, etc.
- Dùmhlachd beag agus tha e nas aotroime agus nas saoire a 'clò-bhualadh nuair a tha nas motha.
