PLA 3D Clò-bhualadh Filament (dh'ailbhinn geal)
- Modail: TS-PLA-Creamy White
CHOMHARRAN:
Material: PLA (Polylactic Acid).
Item Weight: 1KG/2.20 pounds
Item Diameter: 1.75 Millimeters
Recommended Extrusion/Nozzle Temperature: 190°C - 220°C
Recommended Base Plate/Print Bed Temperature: No heated/(20 - 70)°C
Low shrinkage rate and it performs pretty well even when printing larger models.
bathar Tuairisgeul
Amazon Global Purchase
The following is the sales situation of our products on Amazon. If you have a few needs, you can choose the corresponding site for shopping. If you have high-volume requirements, please contact us, we will provide you with more favourable prices.
(All products on the website are sold globally)
Sònrachadh
| Dùthchasach | PLA (Polylactic Acid) |
| Color | dh'ailbhinn geal |
| Weight | 1KG (mu 2.2 puinnd) |
| trast-thomhas | 1.75mm (thaobhach mionaideachd +/- 0.03mm) |
| Moladh Extrusion / Nozzle Teòthachd | C 190 ° - 220 ° C (° F 374 - 428 ° F) |
| Moladh Base Plate / Clò-bhuail Teòthachd Bed | No heated/(20 – 50)°C |
- Recommended Extrusion/Nozzle Temperature: 190°C - 210°C
- Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C
- Ìosal shrinkage ìre agus tha e a 'dèanamh gu math breagha fiù' s nuair a chlò-bhualadh nas motha modailean.
- Àrd-chòrdail le measgachadh de FDM22D printerMakerbot, UP plus, Mendel, Prusa, sreath, etc.
- Neo Toxic: a h-uile bathar air a dhol seachad an RoHS Riaghailt, a dhèanamh le 100% polylactic acid.
- Dùmhlachd beag agus tha e nas aotroime agus nas saoire a 'clò-bhualadh nuair a tha nas motha.
- Raw stuth bho na Stàitean Aonaichte. -àrainneachd chàirdeil le deagh coileanadh.
- Filament tha rianach a phasgadh agus a leaghadh gu math.
- Smooth agus leantainneach a chlò-bhualadh gun clogging no builgean chùis
- 24 x 7 Pro sgioba taic nan custamairean a 'toirt fuasglaidhean teicnigeach.
