6 Simple Steps On How To Replace Brother Label Maker Tape

Brother P-touch label maker allows you to create labels for any need. Its versatility enables you to design custom labels by choosing from a selection of frame designs and from many fonts, sizes and styles. Brother P-touch line of label makers provides a convenient and effective way to help you stay organized. Once your Brother label maker runs out of labels, a new label tape cassette needs to be inserted. In this article, we’ll show you 6 simple steps on how to replace Brother label maker tape.

Step 1

1.Open the Tape Cassette Cover

Check that your Brother P-touch label maker is turned off. Turn the machine over. Press the part marked “<<” and open the tape cassette cover.

Step 2

2.Remove the Empty Tape Cassette

If there is an empty tape cassette in the compartment, pull up the release lever. Pull the used tape cassette straight up to remove it.

Step 3

3. Wind the Loose Tape as Necessary

Remove the stopper from the new tape cassette. If the ribbon is loose, use your finger or scissors to wind the toothed wheel in the direction of the arrow on the tape cassette.

Step 4

4.Insert the New Tape Cassette

Insert the new tape cassette firmly into the compartment, making sure that it clicks into place. Also make sure that the end of the tape in the new cassette feeds under the tape guides.

Step 5

5.Close the Tape Cassette Cover

Close the tape cassette cover.

Note: Make sure that the release lever is up when closing the tape cover. The tape cover cannot be closed if the release lever is pressed down.

Step 6

6.Print a Test Label

After a tape cassette is properly installed, press the up (FEED) key to feed the tape then the cutter button to cut the tape off. Print a test label to see if your installation was successful.

Brother label maker provides a fast and effective way for you to categorize and customize your entire home, office or any other project. When your Brother P-touch label maker runs out of labels, you can just follow the above 6 simple steps on how to replace Brother label maker tape to replace it with a new label tape cassette. Moreover, you can also purchase TIANSE compatible label tape Tze-221, Tze-231, Tze-551, Tze-631, etc. for your Brother P-touch label makers to suit your labeling needs and enjoy more savings.


Post time: May-23-2019